04/25/2018
1. Updated EtherCAT firmware to the latest V1.87 as well as manual.
1/20/2017
1. Updated EtherCAT firmware to the latest V1.71 as well as manual.
11/9/2016
1. Updated EtherCAT firmware to the latest V1.67 as well as manual to 01/09/2017.
10/24/2016
1. Updated EtherCAT firmware to the latest.  V1.66 fixes problems in V1.65 with Mitsubishi drives.
10/19/2016
1. Updated EtherCAT firmware to the latest.  V1.65 as well as 5300 controller to R69_94.
10/23/2014
1. M3-40A/B/C update.  Added Host Read/Write retry and synced code with 40G.
2. M3-41A EtherCAT firmware added as well as R69.83 controller firmware for EtherCAT.

01/04/2012
1. M3-40A/B/C update.  Fixed publishing of multi-master information on backplane for other than master position.  Also removed rounding on tracking which was causing slight
tick once per revolution on motion.

04/25/2011
1. M3-40A/B/C update.  Fixed PLS for sfposc.

12/2/2010
1. M3-40A/B/C update.  Removed MPOS_LIMIT on mposc.  Limit was causing problem on virtual master and camming.

07/14/2010
1. M3-20/21 A/C updates.  16 counter support.

06/04/2010
1. M3-40A/B/C updates.  Camming enhancements and bug fixes.

03/18/2010
1. M3-40A/B/C updates.  Significant changes for MSB debugging, camming file loading, QS2 support.

12/14/2009

1. M320A/C and M321A/C boards updated to add debounce, sample delay, and full 16 PWM as option to general I/O.  Requires controller R63 or greater to use advanced features.

8/06/2009

Notes:
1. M340A to C update V1.34, corrected generate command accuracy and added vcmd/trqc override bit to cmode (0x10).


5/07/09

Notes:

1.  M361A to D update require R58 controller firmware.
2.  M340A to C update require R58 controller firmware as well as latest Quickbuilder.  Quickbuilder project must be rebuilt prior to running in the controller if this is an existing project to ensure the mapping of variable.  
    Significant enhancements have occurred, including the support of S-Curves and higher speed variable access.

